| Ducati 2V Demon 2 valve engine |
| 2V Testa DEMON, 2 Valve engine
For quite some time we are occupied now with the V2 Testa project and the 4 valve version with Testastretta engine we have already in use for a long time. This year the 2 valve version is used . The advantages are obvious; the engine and all other construction units such as injection and wiring are not so complex to be installed and co-ordinated as at the Testastretta model.
However the basis remains the same. 999 swingarm and framework with aluminum holding for the seat. Naturally the water cooler is omitted and the tank moves into the center of the vehicle.
To offer interested customer the possibility to built up their own DEMON bikes we offer the appropriate construction units.
For more infos click the following links:
Developing 2 V Demon
Technic
Festival Italia 07
Biketoberfest 07
Ducati Club Race 08
Review Ducati Club Race 08
Festival Italia 08
Ducati Speed Week 08
Biketoberfest 08
Biketoberfest 09
Demon Presentation Assen 2010
| Prod.Id 2vdemon020
On Demand
|
| Rear Seat Demon
Stable glasfiber part. Without seat cusion. Please do it yourself. | Prod.Id 2vdemon021
435 EUR
|
| Fairing Demon
Stable glasfiber fairing, Race version without headlight cut out. | Prod.Id 2vdemon022
495 EUR
|
| Windshield Race Demon
Windshield Racing by MRA, clear with grid. | Prod.Id 2vdemon023
88,50 EUR
|
| Fuel Tank Dummy Demon
Glasfiber fuel tank dummy. | Prod.Id 2vdemon024
275 EUR
|
| Aluminum Fuel Tank Demon
Handmade alloy fuel tank. With filler cap but without fuel pump. | Prod.Id 2vdemon025
845 EUR
|
| Exhaust System Demon
Handmade exhaust system made from stainless steel. 2 x 45mm diameter. Equal tube length and equal muffler volume. Scope of supply contains 2 noise killers. 105 db without noise killers and 102 db with noise killers!
Picture 1
Picture 2
Picture 3
Picture 4
| Prod.Id 2vdemon026
1.480 EUR
|
| Low-noise exhaust system Demon
97 db without noise killers and 95 db with noise killers!
| Prod.Id 2vdemon027
1.450 EUR
|
| Mounting Alloy Rear Frame
To fix the alloy rear frame on the Testastretta frame some holders must be made and welded on. Price excl. tax for this is 385 €. | Prod.Id 2vdemon028
458,15 EUR
|
| Fairing support
Handmade fairing support, aluminium. | Prod.Id 2vdemon029
235 EUR
|
| Complete-kit 2V Testa Demon
Complete set existing of:
Exhaust system
Fairing
Fuel tank
Fuel tank dummy
Front fairing support
Swingarm
Swingarm axle
Frame
Rear frame aluminium cnc
Nuts and bolts for mounting
The price refers to a glasfiber fairing kit. Also available in carbon for additionally 1000 €.
| Prod.Id 2vdemon030
5.950 EUR
|
| Aluminum Rear Frame Demon
Rear frame, made from alloy, cnc milled. For adapting the rear damper and the rear seat. Must be fitted to the Testastretta frame. See below.
Also available with mounting holes for the original rear frame of the 749/999 models. The you can mount easily the rear frame and rear seat. Please indicate version when ordering. | Prod.Id 2vdemon031
585 EUR
|
| DEMON EVO
This brilliant frame and bike concept developed in 3 years with different riders:
Agoston Rozivall (World Endurance)
Frank Schüller (Several BOT championships!)
Lex van Dijk (well known race driver from Netherlands with 20 years experience!)
The bikes handling and performance is the best what you can get in this class! Our frame is a combination from high strength 25CrMo4 (Chrome/Molybdän) tubes and fully CNC-machined alloy ergal parts. The total weight from the frame is 6,8 kg ! In 3 years development we raced it 18 times under different classes and won 12 times! In 3 years no technical problem!
Now you can buy it!
Riding with a big smile under your helmet !
| Prod.Id demon-evo
On Demand
|
| Chrome/Mloybden frame
This frame is made from 25CrMo4 Chrome/Molybdan and ultra-light, only 6,8 kg. For 2 and 4 valves engines.Suitable are all engines from 7500 SS up to 1198 R types !!!
The standart ducati 749-999Frame weights 13,8 Kg . This Demon Evo frame saves tottaly 7 KG !!!
The rear end is made from CNC aloy 7075 full billet plates and available with the mounting points for the original subframe ,so you can also use all original stuff like fuel tank and seat and exhaust again .Or: all Demon parts for the air cooled version engines !
The mashining is made after welding procces to garanty all seizes and angles for fitting !!! All is made in Germany !! | Prod.Id demonevo1
3.450 EUR
|
| Frame triangle with rear frame support
Is suitable for 749-999 rear frame. Price for a set. | Prod.Id demonevo2
585 EUR
|
| Frame triangle without rear frame support
Frame triangle without rear frame support for self supporting rear seat Demon. Price for a set. | Prod.Id demonevo3
585 EUR
|
